BURNT OUT EXTRACTOR REPLACED WITH NEW LARGER CAPACITY UNIT

Exeon were asked in to provide a quote for a carpentry workshop which had a Dust Extractor destroyed by fire. The Extractor was completely unusable and the ductwork only partly so. Read more...
DUST EXTRACTOR FOR PRODUCT WEIGHING AT FOOD FACTORY

An independent LEV survey at this Food additives plant had been carried out which condemned the existing dust extract system, and the filter was insufficient and being bypassed. Duct velocities were too low causing drop-out of dust, and capture was insufficient causing employee exposure to airborne dust. Action was urgently required to address these issues. Read more...
DUST EXTRACTOR IN WOODWORK SHOP

The existing dust extraction system was in very poor condition, with low flow and poor design. In addition, the unit was not ATEX type which was deemed necessary due to the fine wood dust handled. Read more...
DUST EXTRACTOR SYSTEM AT RESEARCH FACILITY

An independent LEV survey at this cement additives plant had condemned the existing dust extractor system. Read more...
DUST EXTRACTOR SYSTEM AT SCHOOL

The existing dust extractor systems in three separate D&T workshops had low flow and poor design, and were very noisy as internally located, making teaching nearly impossible when running. Read more...
DUST EXTRACTOR SOLUTION FOR SOIL AT A UNIVERSITY

Exeon were asked to provide a Dust extraction solution for a Soil dust extraction requirement at a University. Read more...
NEW DUST EXTRACTOR ON PRINT EXTRACT

The existing print discharge gave off a very fine mist of dust which over 2 weeks amounted to just 1kg of product. However this dust spread across the factory was enough to cause significant concern! Read more...
NEW EXTRACTION SYSTEM ON PAPER WASTE SYSTEM

This paper waste handling system discharged paper cuttings into a waste skip. The discharge arrangement was unfiltered and this allowed large quantities of dust to escape and go all over the adjacent car parking area. Dust Extraction was required to prevent this environmental issue. Read more...
WEIGH DUST AT JAM FACTORY

The Client had a laboratory where sugar dusts were weighed and dispensed. Read more...
DUST EXTRACTION AND VENTILATION FOR D&T WORKSHOP AT COLLEGE

The existing dust extraction systems in D&T workshop had low flow and poor design, and were very noisy as internally located, making teaching nearly impossible when running. In addition, the units were not ATEX rated which was necessary due to the fine wood dust being handled. Read more...
DUST EXTRACTION SYSTEM FOR FOOD PROCESSING PLANT

A Food processing plant was installing a new production line and needed dust extraction. Read more...